We get allot of requests about our Magnets and ordering more for other projects reefers having going on.
We first start with a very strong Neodymium Magnet that’s coated in Epoxy from the factory as a first layer of defense.We then print out using PETG
a snap fit covering and place another layer of reef safe silicone around the magnet for a triple protection.
This also adds the additional benefit of protecting the magnet from drops or scratches. Just like how your phone case protects your phone.
Sizing: 33.6mm (1.33″) in Diameter | 6.4mm (.25″) Thick
Qty 5 = .25 Off Each Magnet
Qty 6-10 = .50 Off Each Magnet
Qty 11-15 = .75 Off Each Magnet
Qty 16-50 = $1 Off Each Magnet
Magnets and saltwater is a tough combination. Our Magnets are epoxy coated as a first layer of defense. We then encase our magnets within our 3D prints with solid infill, then glue everything together with 100% reef safe silicone as an extra layer of protection. We find this combination does a great job of keeping the saltwater away from our Magnets.